HP StorageWorks P9000 Performance Advisor Software v5.4 Troubleshooting and FAQs Guide (T1789-96336, April 2012)

SolutionError messageScenario
Select a component (example: Parity
Group, MP Blade Processor) in P9000
Remote Web Console to view the
corresponding performance data in P9000
Performance Advisor. For more information
on selecting and viewing the component
data, see the section on “Launching P9000
Performance Advisor from P9000 Remote
Web Console” in the HP StorageWorks
P9000 Performance Advisor Software User
Guide. For document download location,
see “Related information” on page 97.
P9000 Performance Advisor has detected
that a component is not selected to display
data.
If a component is not selected from the
Components list for a particular P9000 disk
array in P9000 Remote Web Console.
CLUI errors messages
CLUI commands fail if invalid user credentials are given during CLUI installation describes the error
messages that you might see when using CLUI software.
Table 3 Error messages
SolutionError messageScenario
If you are connecting to a UNIX system
remotely using telnet, your terminal
emulation is not supported. You can try
running the command using a different
terminal emulation, such as xterm or ansi.
Otherwise, contact your HP representative.
The console output cannot be
read.
Error reading console output.
One of the parameters is not entered
correctly or the management station does
not have a data collector running for the
requested data set.
The command does not display an
output.
ERROR: No data returned for command
Error messages52