HP XP P9000 Performance Advisor Software v6.0 Command-line User Interface Reference Guide

Provides the I/O per second data for the ThP and smart pools.
Switches
ThP or smart pool for which you want to view the I/O per second. You must enter a
pool id with a ThP prefix, for example, THP1.
POOL
Option to view the I/O per second on all ThP and smart pools.ALL
Day on which the aggregated data for the THP and smart pools is requested.-d
Week in which the aggregated data for the THP and smart pools is requested.-w
Month in which the aggregated data for the THP and smart pools is requested.-m
Hour at which the aggregated data for the THP and smart pools is requested.-h
Start time to view the daily or hourly aggregated data for the specified interval.-st
End time to view the daily or hourly aggregated data for the specified interval.-et
NOTE: The -st and –et options are supported with the -d and -h options only.
Examples
aggregate -a -items POOL_IOPS:53036:ALL -h 12.02.2013 15
aggregate -a -items POOL_IOPS:53036:ALL -d 12.02.2013
aggregate -a -items POOL_IOPS:53036:ALL -w 12.02.2013
aggregate -a -items POOL_IOPS:53036:ALL -m 2013.12
aggregate -a -items POOL_IOPS:53036:ALL -h -st 01.15.2014 14:00:00 -et
01.15.2014 16:00:00
aggregate -a -items POOL_IOPS:53056:ALL -d -st 01.12.2014 00:00:00 -et
01.14.2014 16:00:00
aggregate -a -items POOL_IOPS:53036:THP1 -h 12.02.2013 15
aggregate -a -items POOL_IOPS:53036:THP100 -w 12.02.2013
aggregate -a -items POOL_IOPS:53036:THP127 -m 2013.12
aggregate -a -items POOL_IOPS:53036:THP1 -h -st 01.15.2014 14:00:00 -et
01.15.2014 16:00:00
aggregate -a -items POOL_IOPS:53056:THP1 -d -st 01.12.2014 00:00:00 -et
01.14.2014 16:00:00
PROPUTILITY
Syntax
proputility [-i] [-ms <management station>] [-rauth <report
username:password>]
nl
[-cauth <config username:password>]
Supported disk array types
XP and P9000 disk arrays
Description
Enables you to configure the properties file, which in turn enables you to integrate other software
and shell scripts.
38 CLUI commands