HP XP P9000Watch and HP XP P9000Sketch Reference Guide for HP XP P9000 Performance Advisor v5.5 (T1789-96341, February 2013)

The Array menu also displays the HP XP P9000Watch version. You can also view the HP XP
P9000Watch version using the following command in the command prompt:
XPWatch.exe -v
To select an array, enter the number (Num) corresponding to it. For example, to select a P9000
disk array that belongs to the P9500 disk array model, enter 3.
NOTE: You can select only one array at a time.
Figure 5 shows the Array menu.
Figure 5 Array menu
Table 5 lists the fields of the Array menu.
Table 5 Array menu — fields
DescriptionScreen field
Selection numberNum
Serial number of the arraySerial
Type indicates the array model. Supports P9000 disk array
models such as, P9500 and XP disk array models such as
Type
XP 1024/48, XP10000, XP 12000, XP20000, and XP
24000.
Sync/Async Metrics
The Sync/Async Metrics screen lists all the configured P-VOLs.
Figure 6 Sync/Async Metrics
NOTE: The Sync/Async Metrics are available only in the Interactive mode.
Menus 21