HP XP P9000Watch and HP XP P9000Sketch Reference Guide for HP XP P9000 Performance Advisor v5.5 (T1789-96341, February 2013)

Port menu
The Port menu lists all the ports that are connected to the selected host groups. This menu is used
to select the port whose performance needs to be monitored or captured.
Figure 16 shows the Port menu.
Figure 16 Port menu
Table 7 describes the fields that appear in the Port menu.
Table 7 Port menu — screen fields
DescriptionScreen field
Selection numberNum
Port numberPort
Slot numberSlot
Type of port (SCSI, Fibre, ESCON, iSCSI, ENAS, FCoE)Type
Connection type (N for point-point, NL for FC-AL)Topo
Fabric login (Y/N)FLOGI
Operating mode of the port (Target, MCU Initiator, RCU Target, e-LUN initiator)Mode
Security switch (On/Off)Secu
Storage Logical Partition (SLPR) number.
NOTE: Slpr does not exist in the P9000 disk arrays. So, the Slpr field displays
N/A for the P9000 disk array in the output screen of the Port menu.
Slpr
Count of DKAs associated with LDEVs mapped to the portDKA#
Count of RAID groups mapped to the portDg#
Count of LDEVs mapped to the portLDEV#
Count of unique LDEVs mapped to the portLh#
Menus 33