HP XP P9000Watch and HP XP P9000Sketch Reference Guide for HP XP P9000 Performance Advisor v5.5 (T1789-96341, February 2013)

Figure 19 LDEV menu
Table 9 describes the fields that appear in the LDEV menu.
Table 9 LDEV menu — screen fields
DescriptionScreen field
Selection numberNum
CU: LDEV numberLDEV
RAID groupRG
Emulation typeEmulation
SLPR number
NOTE: Slpr does not exist in the P9000 disk arrays. So,
the Slpr field displays N/A for the P9000 disk array in the
output screen of the LDEV menu.
Slpr
Cache Logical Partition (CLPR) numberClpr
DKA or ACP associated with the LDEVDKA
LUSE positionLuseP
Number of ports mapped to LDEVMap#
Viewing LDEV menu
This screen appears when you select the Filter RAID Groups by LDEVs option from the Viewing Pick
LDEVs/RAID Groups Selection Scheme.
Settings menu
The Settings menu enables you to modify the settings.
This menu includes:
• “Menu settings” (page 37)
• “Performance data collection settings” (page 37)
Figure 20 shows the Settings menu.
36 Working with HP XP P9000Watch menus and commands