HP P9000 Business Copy for Mainframe Systems User Guide (AV400-96386, October 2011)
Table 19 CESTPAIR parameters
DescriptionValueParameter
NADevice numberDEVN
These parameters must be used for successful
execution of the command.
Primary volume (S-VOL): SSID, serial number,
channel connection address, and CU number.
PRIM
To request the Add and Split operation, set
MSF00 instead of a serial number. This
parameter is valid for MODE(COPY) or
MODE(NOCOPY) only.
To create pairs in a consistency group, set
MAnn0 instead of a serial number. nn is a CTG
ID.
NASecondary volume (T-VOL): SSID, serial
number, channel connection address, and CU
number.
SEC
The storage system recognizes only COPY for the
MODE parameter, even if NOCOPY is specified.
COPYMODE
NOCOPY
2
Copy speed is medium, regardless what is specified
for the PACE parameter.
Any numberPACE
Not used by Business Copy Z.Not applicableCRIT
MSGREQ function is applicable.YES
2
MSGREQ
Note that you cannot use the MSGREQ function
when the Add and Split operation is required. If
you specify YES for this parameter when the Add
and Split operation is required, the command is
rejected and ends abnormally by reporting CC =
8.
MSGREQ function is not applicable.NO
Pair create operation is performed whether the
T-VOL is online or not.
YESONLINSEC
1
Pair create operation is not performed if the T-VOL
is online.
NO
1
When you do not specify the parameter, the result is same as when you specify NO for this parameter.
2
If NOCOPY is specified for the MODE parameter and YES for the MSGREQ parameter, the CESTPAIR command
ends before the copy operation is completed.
CESTPAIR example
ESTPAIR
The following table describes the PPRCOPY ESTPAIR command parameters used to create pairs.
Table 20 PPRCOPY ESTPAIR parameters
DescriptionValueParameters
Only one of the three parameters should be
specified. The italic term is the arbitrary name.
DDNAME = dname = JCL statement identifying
the volume.
DDNAME,
SYSNAME, or
UNITADDRESS For example, dname is the arbitrary unique
SYSNAME = sysxxx = SYSNAME in the ASSGN
system control statement.
HP Confidential58 Pair operations using PPRC