HP P9000 Business Copy for Mainframe Systems User Guide (AV400-96386, October 2011)

QUERY example
Output descriptions
The following table shows the field descriptions of the output resulting when CQUERY TSO and
QUERY ICKDSF commands are run.
Table 29 Field descriptions for CQUERY TSO and QUERY ICKDSF command output
DescriptionField
Device number of the volume on which the CQUERY command is issued.DEVICE
PRIMARY indicates that the volume is an S-VOL. SECONDARY indicates that the volume
is a T-VOL.
LEVEL
Pair statusSTATE
Invalid for Business Copy; “Active” displays.PATH STATUS
Invalid for Business Copy; “NO” displays.CRIT
Invalid for Business Copy; “NO” displays.CGRPLB
SSID of the S-VOL CUPRIMARY-SSID
S-VOL LDEV numberPRIMARY-CCA
S-VOL CU numberPRIMARY-LSS
S-VOL serial numberPRIMARY-SERIAL
SSID of the T-VOL CUSECONDARY-SSID
T-VOL LDEV numberSECONDARY-CCA
T-VOL CU numberSECONDARY-LSS
T-VOL serial number. If you RUN the CQUERY TSO command for the T-VOL, the following
information is also displayed:
SECONDARY-SERIAL
00ab000nnnnn
where “a” indicates that the pair is defined as a consistency group and “b” indicates
the pair was split using At-Time Split. “0” indicates otherwise. “nnnnn” is the T-VOL serial
number.
HP Confidential Displaying pair information with CQUERY TSO, QUERY ICKDSF 67