HP P9000 Business Copy for Mainframe Systems User Guide (AV400-96386, October 2011)

Table 31 Volume List
DescriptionField
A message displays when there is no volume or pair to display. If you see the message in
the Volume List, click a different icon in the Tree on the left area of the Pair Operation
window.
Message
S-VOL information displays in XX:YY:ZZ format.
• XX:YY:ZZ is the LDKC number:CU number:LDEV number
S-VOL
Pair status is displayed.Status
T-VOL information displays in XX:YY:ZZ format.
• XX:YY:ZZ is the LDKC number:CU number:LDEV number
T-VOL
Indicates the speed that data is copied according to the pair status.Copy Pace
• Slower, Medium, or Faster displays if the pair status is Pending, SP-Pend, V-Split, Resync,
or Resync-R.
• Dashes (----) display if the pair status is none of the above.
Note: When you create Business Copy Z pairs by using RAID Manager, the copy pace is
set as follows.
• When the track size is 1 or 2, Slower is set.
• When the track size is 3, Medium is set.
• When the track size is 4 to 15, Faster is set.
Indicates the percentage of pair synchronization, if applicable, according to the following
pair statuses.
Sync
• For Simplex, Suspend, and Deleting, dashes (----) display.
• For Pending, SP-Pend, and V-Split, the percentage of copied data displays.
• For Duplex, Split, Resync and Resync-R, the percentage of identical data in the S-VOL
and T-VOL displays.
The volume’s emulation type.Emulation
The number of cylinders assigned to the volume displays.Capacity (Cyl)
The T-VOL’s consistency group number. If no consistency group is set for the T-VOL, dashes
(---) display.
CTG
The S-VOL’s cache logical partition displays.CLPR (S)
The T-VOL’s cache logical partition displays.CLPR (T)
Displays the current state of the volume in terms of whether the Compatible FlashCopy and
Compatible FlashCopy SE relationships are established or not. For details, see the HP
P9000 forCompatible FlashCopy MirroringUser Guide.
Relationship(S)
Preview List
The Preview List shows the operations and changes you have made from the Pair Operation window.
You can review your changes, modify the operation or your changes, and apply them to the storage
system.
The Preview List displays below the Volume List.
To modify an operation or change, right-click the row and select Delete or Modify. To see error
messages, click Error.
The following table describes the Preview List fields.
HP Confidential Pair Operation window 71