HP P9000 Business Copy for Mainframe Systems User Guide (AV400-96386, October 2011)

The filter settings you select are effective in the current session only. They reset when you select
another program product to display.
Table 34 Display Filter dialog box
DescriptionField
You can specify the cache logical partition (CLPR).CLPR
You can display internal or external volumes. Both boxes are checked by default. Uncheck
the box you do not want.
Volume Type
Attribute
• Volume Attribute. If you select the Reserved check box, only reserved volumes display.
Reserved volumes include volumes specified as T-VOLs.
• Pair Attribute. You can choose to display pair volumes or non-pair volumes. You can
select either of the following radio buttons:
- L1: Displays L1 pairs only.
- L1-L2: Displays both L1 and L2 pairs in hierarchical structure.
Select the statuses of the pairs you want to see.Pair Status
NOTE: If you select Cascade, you cannot select Reserved. If you select L1-L2, you cannot select
any other check boxes.
If the check box of Business Copy Z or Snapshot is not selected, all the check boxes in each tab
will be grayed out.
History window
The History window shows the history of operations performed on Business Copy Z, Compatible
FlashCopy, and Compatible FlashCopy SE pairs and data associated with the operations.
• The upper pane shows Business Copy Z history.
• The lower pane shows Compatible FlashCopy and Compatible FlashCopy SE history.
NOTE: An S-VOL or T-VOL LDEV number that ends with a pound or gate symbol (#) indicates
that the LDEV is an external volume (for example, 00:00:01 #). An LDEV number that ends with
a letter "X" indicates the LDEV is a virtual volume used by Thin Provisioning Z (e.g., 00:00:01 X).
HP Confidential History window 73