HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 36 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ10x – YKZ20x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
If the error still exists after the above action has been
taken, contact the service representative.
nnn (decimal number)
Return code from the OS's REXX variable access
routine
name (string)
REXX variable name
value (string)
REXX variable value
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
See the command code description
in the explanation of the YKZ201E
message.
yyy (string)
Maintenance information
#
If this message is output while the YKLOAD command
is being executed, the RC is 44.
The command cannot be executed because a
parameter error occurred.
A Parameter error occurred.
(detail=message-text, cmd=xxx,
pos=yyy)
YKZ205E TSO RC=0
message-text (string)
Message text
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
See the command code description
in the explanation of the YKZ201E
message.
yyy (string)
Maintenance information
The command cannot be executed because an I/O
error occurred.
An I/O error occurred.
(detail=message-text, cmd=xxx,
pos=yyy)
YKZ206E TSO RC=0
message-text (string)
Message text
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
See the command code description
in the explanation of the YKZ201E
message.
yyy (string)
Maintenance information
List of Messages 117