HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)
Table Of Contents
- P9000 for Business Continuity Manager Software Messages
- Contents
- 1 Messages
- 2 Storage System Sense Byte Information
- 3 Support and other resources
- Glossary
Table 36 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ10x – YKZ20x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
The command cannot be executed because a Core
processing error occurred.
A Core process error occurred.
(detail=message-text, cmd=xxx,
pos=yyy)
YKZ207E MSG TSO
CON SC=52 RC=44
#
message-text (string)
Message text
The message text will be as shown
below:
• If an OS macro error occurred:
xxxxxxxx macro error,
return code = rr, devn =
dddd
xxxxxxxx: OS macro name
rr: Return code from the macro
dddd: device number
• If system name acquisition
failed:
ASASYMBM macro error,
rc = rr
rr: Return code of ASASYMBM
macro
• If the log stream definition is not
DASD-dedicated:
Not DASD-only Logger
definition
• If the MAXBUFSIZE of the log
stream definition is not 64000:
MAXBUFSIZE of Logger
definition invalid
• If this message is displayed as
maintenance information (1):
ENTRYID ( eeeee ) for
MSGID ( nnn ) is
invalid
eeeee, nnn: Maintenance
information
• If this message is displayed as
maintenance information (2):
ENTRYID ( eeeee ) for
TYPE ( ttt ), LEVEL ( lll
) is invalid
eeeee, ttt, lll: Maintenance
information
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
See the command code description
in the explanation of the YKZ201E
message.
yyy (string)
118 Messages