HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 1 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YK80x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
This is only displayed when the output
destination is SYSTSPRT.
label
Label at which BCM Monitor stops
BCM Monitor will stop at the end of a cycle.time BCM Monitor will stop
at the end of monitor cycle.
YK8041I PRT CON
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
BCM Monitor will go to sleep at the point label.time BCM Monitor will sleep
at STOPPOINT 'label' for
max 'sleep-time' minutes.
YK8042I PRT CON
Entering the WAKEUP command resumes copy group monitoring
before the duration identified by sleep-time has elapsed.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
label
Label at which BCM Monitor goes to sleep
sleep-time
Sleep duration
BCM Monitor has reached the point label.time STOPPOINT 'label'
reached.
YK8043I PRT CON
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
BCM Monitor will sleep for the duration identified by sleep-time.time BCM Monitor will sleep
now for max 'sleep-time'
minutes.
YK8044I PRT CON
Entering the WAKEUP command resumes copy group monitoring
before the duration identified by sleep-time has elapsed.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
sleep-time
Sleep duration
BCM Monitor has reached the end of a cycle.time BCM Monitor reached
the end of the monitoring
cycle.
YK8045I PRT CON
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
BCM Monitor will execute the operator command identified by
opcmd.
time Execute operator
command 'opcmd'.
YK8046I PRT CON
12 Messages