HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)
Table Of Contents
- P9000 for Business Continuity Manager Software Messages
- Contents
- 1 Messages
- 2 Storage System Sense Byte Information
- 3 Support and other resources
- Glossary
Table 37 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ21x – YKZ24x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
See the pair index description in
the explanation of the YKE003E
message.
#
If this message is output while the YKLOAD
command is being executed, the RC is 44.
TCA cannot be used on a storage system with a
P-VOL.
Primary device does not support TCAYKZ224E MSG SC=8
RC=36
#
(pair-index)
Use a device that supports TCA.
pair-index
See the pair index description in
the explanation of the YKE003E
message.
#
If this message is output while the YKLOAD
command is being executed, the RC is 44.
TCA cannot be used on a storage system with an
S-VOL.
Secondary device does not support
TCA
YKZ224E MSG SC=12
RC=36
#
(pair-index)
Use a device that supports TCA.
pair-index
See the pair index description in
the explanation of the YKE003E
message.
#
If this message is output while the YKLOAD
command is being executed, the RC is 44.
This group contains copy pairs that do not support
BC Z or Cnt Ac-S Z Group ID.
Some pairs in this group do not
support BC Z or CA Group ID
membership.
YKZ225E MSG SC=36
RC=36
#
Correct the configuration file, and then re-execute
the YKLOAD command.
#
If this message is output while the YKLOAD
command is being executed, the RC is 44.
For the specified model, TRK cannot be specified for
TCA_MAP in the TCA options.
stemTCA_MAP=TRK not supported
by some group pairs
YKZ226E MSG SC=36
RC=48
#
Correct the contents of the configuration file.
stem
Stem name
#
If this message is output while the YKLOAD
command is being executed, the RC is 44.
Some copy pairs in this group do not support
TCA_FLOWCONTROL=N.
stemTCA_FLOWCONTROL=N not
supported by some group pairs.
YKZ227E MSG SC=36
RC=36
#
Correct the configuration file, and then re-execute
the YKLOAD command.
stem
Stem name
#
If this message is output while the YKLOAD
command is being executed, the RC is 44.
The value of the REXX variable is invalid.Invalid pair attribute name = valueYKZ228E MSG SC=36
RC=36
#
(pair-index)
124 Messages