HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 37 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ21x – YKZ24x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
This operation is not supported when a remote
function is in use.
This operation (operation) does not
support remote command.
YKZ246E MSG SC=48
RC=48
operation
Operation name
Information on the specified stem name is missing.STEM(stem) information for Core
Processing is not found.
YKZ247E MSG SC=44
RC=44
The YKLOAD command has not been executed or the
stem name does not match the stem name specified
for the YKLOAD command.
stem
Stem name
Certain information required for CLI command
execution has not been registered.
Necessary information for Core
Processing is not stored. (STEM =
stem)
YKZ248E MSG SC=44
RC=0
Execute the YKLOAD command to register the
information.
stem
#
Stem name
#
The (STEM = stem) portion is displayed only when
the stem is obtained.
The DAD or ROUTE parameter specified on the
YKLOAD command is invalid.
Specified DAD or ROUTE is invalid.YKZ249E MSG SC=48
RC=48
#
(pair-index)
Correct the specification.
pair-index
See the pair index description in
the explanation of the YKE003E
message.
#
If this message is output while the YKLOAD
command is being executed, the RC is 44.
Table 38 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ25x)
Explanation and Recommended ActionsMessage TextMessage ID
The command cannot be executed because a
NAME/TOKEN delete error occurred.
A NAME/TOKEN delete error
occurred. (return code=nnn, name=
name, cmd=xxx, pos=yyy)
YKZ250E MSG SC=40
RC=44
nnn (decimal number)
Return code from the
NAME/TOKEN registration routine
(IEANTCR)
name (string)
Name to be registered in the
NAME/TOKEN service
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
128 Messages