HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 38 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ25x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
See the command code
description in the explanation of
the YKZ201E message.
yyy (string)
Maintenance information
Business Continuity Manager failed to complete the
requested processing.
DASD device
device-number-1(device-number-2)
YKZ251E MSG SC=32
RC=32 (pair-index)
Processing will continue with this device skipped.
management error, message-text.
(code1 code2, cmd=xxx, pos=yyy)
Check the status of the error device, correct any
errors related to the configuration or execution
conditions, and then re-execute the command.
device-number-1 (string)
The device that issued I/O
device-number-2 (string)
The device to be manipulated
If the device number of the device
to be operated is not found, ****
is displayed.
message-text (string)
Message text
code1 (Hexadecimal number)
Subcommand code
code2 (Hexadecimal number)
Error code
For details about error codes, see
“Storage System Sense Byte
Information” (page 163).
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
See the command code
description in the explanation of
the YKZ201E message.
yyy (string)
Maintenance information
pair-index
See the pair index description in
the explanation of the YKE003E
message.
Business Continuity Manager failed to complete the
requested processing.
DASD device
device-number-1(device-number-2)
YKZ252E MSG SC=8
RC=8
This device is skipped and processing continues.
management error, message-text.
(code1 code2, cmd=xxx, pos=yyy)
Check the status of the error device, and fix the
problem in the configuration or execution condition
if any.
List of Messages 129