HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 38 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ25x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
device-number-1 (string)
The device that issued I/O
device-number-2 (string)
The device to be manipulated
message-text (string)
Message text
code1 (Hexadecimal number)
Subcommand code
code2 (Hexadecimal number)
Error code
For details about the error codes,
see “Storage System Sense Byte
Information” (page 163).
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
See the command code
description in the explanation of
the YKZ201E message.
yyy (string)
Maintenance information
An I/O error occurred. Processing will continue with
this device skipped.
DASD device
device-number-1(device-number-2)
YKZ253E MSG SC=32
RC=32 (pair-index)
If a sense byte is set, the sense byte is indicated in
the YKZ255E message.
I/O error. (CC=code1 CSW=code2
code3 code4 code5, cmd=xxx,
pos=yyy).
When CC=3:
The corresponding device might not be configured
or connected.
When CC=0 and CSW=xxxxxx0000xxxx (DSB=00,
CSB=00):
The corresponding device might not be configured
or connected.
When CC=0 and CSW=00000000060000:
MIH might have occurred or a logical path might not
be connected.
device-number-1 (string)
The device that issued I/O
device-number-2 (string)
The device to be manipulated
If the device number of the device
to be operated is not found, ****
is displayed.
code1 (decimal number)
CC information
code2 (Hexadecimal number)
130 Messages