HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 43 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ3x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
Issued CLI command name and
its parameters
A maximum of 109 characters
can be output. If 109 is
exceeded, the remainder are
discarded.
This log data indicates the result of a CLI command
execution.
hh:mm:ss command RC=rcYKZ311I CON
hh:mm:ss
Time the CLI command was issued
(local time)
command
Issued CLI command name
rc
Return code for the CLI command
For details, see the command
descriptions in the HP P9000 for
Business Continuity Manager
Software Reference Guide.
An error was detected during parameter analysis.Supplied parameters invalid.YKZ320E TSO
The specified time value is invalid.Time value is invalid.YKZ321E TSO
The SEC and MIN parameters cannot be specified
at the same time.
Specify SEC and MIN parm
exclusively.
YKZ322E TSO
An error was detected in the REXX service.command detected the rexx-service
service error. (return code=r[, reason
code=n]).
YKZ330E TSO RC=64
command
Issued CLI command name.
rexx-service
Name of the REXX service where
an error was detected.
r (decimal number)
Return code from the REXX
service.
For details, see the TSO/E REXX
User's Guide.
n (decimal number)
Reason code from the REXX
service.
For details, see the TSO/E REXX
User's Guide.
The CLI command terminated with an invalid return
code.
command terminated with an invalid
return code. (r).
YKZ331E TSO RC=64
command
Issued CLI command name.
r
Return code that the CLI command
created.
List of Messages 147