HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 44 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ40x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
3: The suspend processing ended abnormally.
uu (decimal number)
Status of Continuous Access Journal(0 or 1)
0: All Continuous Access Journal copy pairs were in
the DUPLEX status during the suspension.
1: During the suspension, there was a Continuous
Access Journal copy pair whose status was not
DUPLEX.
eeee (hexadecimal number)
Error information on suspend processing
0001: Suspension is not possible because the
ShadowImage copy pair status is invalid.
0002: Suspension is not possible because an error
occurred due to a problem in storage system.
ATTIME-suspend-time (GMT)
ATTIME suspend time:
YYYYMMDD-HH:MM:SS.NNNNNN
YYYY: Year
MM: Month
DD: Day
HH: Hour
MM: Minute
SS.NNNNNN: Second
The status of the Cnt Ac-J Z copy pair was invalid
while the suspend processing using the CAJ ATTIME
suspend function was being performed.
An unexpected CAJ pair status
existed during suspension of CAJ
ATTIME. (CT ID=ii, R-JNL=jj,
YKZ408E MSG SC=24
RC=24
Check the status of the Cnt Ac-J Z copy pair, and
remove the problem. After that, use the YKSUSPND
GENID=gg, ATTSTS=aa, SISTS=ss,
URSTS=uu, CODE=eeee,
TIME=ATTIME-suspend-time)
command to cancel the ATTIME suspend time, and
then acquire the backup again. See “Multi-line
Messages Output to SYSTSPRT” (page 157) for details.
ii (hexadecimal number)
consistency group ID for BC Z (00-7F)
jj (hexadecimal number)
The journal group number specified for the sub
consistency group ID for the Cnt Ac-J Z that links with
BC Z (00-FF)
gg (hexadecimal number)
Generation ID (00-FF)
aa (decimal number)
Status of ATTIME suspension (0-4)
0: No ATTIME suspend time has been set.
1: The ATTIME suspend time has been set, but
suspension has not been performed yet.
2: Suspension was performed because the ATTIME
suspend time expired.
3: Suspension was performed because the timeout
period expired, or because the Cnt Ac-J Z copy pair
was in the suspend status at the ATTIME suspend
time.
152 Messages