HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)
Table Of Contents
- P9000 for Business Continuity Manager Software Messages
- Contents
- 1 Messages
- 2 Storage System Sense Byte Information
- 3 Support and other resources
- Glossary
Table 45 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ41x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
• LinkageOption=HS: 2DC
configuration with
HyperSwap and Cnt Ac-J Z
• AttimeSplitMode=QUICK:
Quick suspend mode for the
CAJ ATTIME suspend function
#1
If this message is output while the YKLOAD
command is being executed, the RC is 44.
#2
The following shows the storage system models
for which you can use the parameter-name:
• Consistency time mode for Cnt Ac-J Z
XP12000/XP10000 disk array
Version of the storage system support
function: X'16' or higher
◦
◦ XP24000/XP20000 disk array
Version of the storage system support
function: X'21' or higher
• Open/MF Consistency Preservation Function for
Cnt Ac-S Z
◦ XP24000/XP20000 disk array
Version of the storage system support
function: X'22' or higher
◦ P9500 disk array
Version of the storage system support
function: X'31' or higher
• 2DC configuration with HyperSwap and Cnt
Ac-J Z
◦ XP24000/XP20000 disk array
Version of the storage system support
function: X'22' or higher
◦ P9500 disk array
Version of the storage system support
function: X'31' or higher
• Quick suspend mode for the CAJ ATTIME
suspend function
◦ XP24000/XP20000 disk array
Version of the storage system support
function: X'23' or higher
The device defined in the disk configuration
definition file exists on a storage system that differs
The device indicated by devn in the
disk configuration definition file is on
a storage system that differs from sn.
YKZ415E MSG SC=48
RC=48
from the storage system in the disk configuration
definition file. For this reason, a NG scan cannot
be executed.
Check the device address domain ID specified in
the disk configuration definition file or the Set
Defaults panel. For details about the NG scan, see
the HP P9000 for Business Continuity Manager
Software Reference Guide.
devn (hexadecimal number)
156 Messages