HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 47 Details of Error Codes 20xx – 22xx (continued)
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
Not outputOutputA BC Z copy pair cannot be made
because the specified S-VOL is either
a P-VOL or S-VOL for FlashCopy.
22F7
Not outputOutputA BC Z copy pair cannot be
resynchronized (by either
22F9
ReverseResync or QuickRestore)
because the volume is of a common
volume configuration consisting of a
P-VOL of BC Z and a P-VOL of
FlashCopy.
Table 48 Details of Error Codes 23xx
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
Not outputOutputThe command could not be executed
because a BC Z program product has
not been installed.
2301
Not outputOutputThe command could not be executed
because an attempt was made to
2309
make a copy pair that exceeded the
maximum number of BC Z copy pairs.
Not outputOutputA BC Z copy pair status cannot be
changed because the status of the
2310
copy pair does not allow a status
transition. The reason might be one
of the following:
• The combination of the request
command and the status of the
specified copy pair do not allow
the status transition. For
information on combinations, see
the Business Copy for Mainframe
Systems User Guide for the disk
array.
• The copy pairs cannot be
suspended collectively because a
copy pair that is not in the DUPLEX
status is among the specified copy
pairs.
• The copy pairs cannot be
suspended collectively because a
copy pair for which transition is
not possible is among the specified
copy pairs.
• An ATTIME suspend time cannot
be set because a copy pair that is
not in the PENDING or DUPLEX
status is included in the C/T group.
Not outputOutputThe copy pair cannot be dissolved
because the copy pair is in the
SIMPLEX status.
2311
166 Storage System Sense Byte Information