HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 48 Details of Error Codes 23xx (continued)
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
suspend function cannot be
executed.
• The ATTIME suspend function
cannot be executed because the
P-VOL is a Non Gen'ed volume.
Not outputOutputA BC Z copy pair cannot be made
because the LDEV security is set for
the specified S-VOL.
23BB
Not outputOutputA BC Z copy pair cannot be deleted
because the specified BC Z copy pair
is in SUSPVS status.
23EF
Not outputOutputThe command could not be executed
because the specified C/T group ID
is out of the valid range.
23F1
Not outputOutputThe command cannot be executed.
The reason might be one of the
following:
23F2
• The specified C/T group ID is not
registered.
• The copy pair is in the SIMPLEX
status.
Not outputOutputThe command could not be executed
because the specified ATTIME
suspend time is in the past.
23F3
Not outputOutputThe command used to request that the
ATTIME suspend time information be
23F4
acquired could not be executed due
to the following reasons:
• The command was issued to the
P-VOL.
• The status of the copy pair is
SIMPLEX.
Make sure that the command is
properly issued and the copy group
definition file has been correctly
configured.
Not outputOutputThe command could not be executed
because the ATTIME suspend time is
23F5
already set. To change the
configuration of the copy group
definition file, first cancel ATTIME
suspension.
Not outputOutputA BC Z copy pair status cannot be
changed because the specified BC Z
23FF
copy pair status does not allow the
status to be changed.
Details of Error Codes 171