HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 54 Details of Error Codes 4Bxx (continued)
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
Not outputOutputNot outputA TCA copy pair cannot be made
because the specified CTID is not
registered in the storage system.
4BA9
Not outputOutputNot
output
No timestamp transfer mode Cnt
Ac-S Z copy pair can be made
4BB1
because the specified volume is not
a Cnt Ac-S Z copy pair.
Not outputOutputNot
output
A timestamp transfer mode Cnt Ac-S
Z copy pair cannot be made
4BB2
because the specified volume is an
XRC pair.
Not outputOutputNot
output
A Cnt Ac-S Z copy pair
resynchronization that makes it
4BD1
possible to use the Open/MF
Consistency Preservation Function
cannot be performed because the
specified C/T group ID is invalid.
Not outputOutputNot
output
A Cnt Ac-S Z copy pair cannot be
made and resynchronized because
4BD2
the specified volume does not
support the Open/MF Consistency
Preservation Function.
Table 55 Details of Error Codes 50xx – 6Axx
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
Not outputOutputNot outputThe command device cannot be
defined because the specified
501C
volume is a journal volume.
Alternatively, a Cnt Ac-J Z copy
pair cannot be made.
Not outputOutputNot outputA command device cannot be
deleted because the APID differs
from the defined APID.
64E2
Not outputOutputNot outputThe remote DKC control function
cannot be executed because the
command device is not set.
64E3
Not outputOutputNot outputA command device cannot be
defined because the specified CU
number is not supported.
64E8
Not outputOutputNot outputThe paths between CUs, which
contain command devices, are not
set.
64EA
Not outputOutputNot outputThe command device cannot be
defined. The reason might be one
of the following:
64FB
• The corresponding volume is not
installed.
• The corresponding volume is a
system residence volume.
186 Storage System Sense Byte Information