HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 55 Details of Error Codes 50xx – 6Axx (continued)
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
Not outputOutputA copy pair cannot be made. The
reason might be one of the
following:
69F3
• The storage system serial
number of the P-VOL is
incorrect.
• The SSID of the P-VOL is
incorrect.
• The CU number is not
supported.
• The storage system does not
support the Open/MF
Consistency Preservation
Function.
Not outputOutputNot
output
A status cannot be changed
because the specified volume is the
S-VOL.
69F5
Not outputOutputA suspension cannot be made. The
reason might be one of the
following:
69F7
• The specified parameter is
invalid.
• The storage system does not
support the Open/MF
Consistency Preservation
Function.
Not outputOutputA suspension cannot be made
because there is an invalid
parameter.
69F8
Not outputOutputA copy pair cannot be dissolved
because there is an invalid
parameter.
69F9
Not outputOutputA copy pair cannot be dissolved
because the volume that received
the command is a BC Z S-VOL.
69FB
Not outputOutputNot outputA TCA copy pair cannot be
resynchronized, suspended, or
69FC
dissolved because a volume other
than TCA has been specified.
Not outputOutputNot outputA TCA copy pair cannot be
dissolved with Consistent specified
69FE
because the specified volume is not
the S-VOL.
Not outputOutputA copy pair cannot be made
because the program product
69FF
necessary for the operation is not
installed.
Not outputOutputNot outputA C/T group ID cannot be
registered because there is an
invalid parameter.
6A00
188 Storage System Sense Byte Information