HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 56 Details of Error Codes 7Fxx – 8Cxx
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
OutputNot outputThe command cannot be executed
because no program product for
copying is installed.
7F86
OutputNot outputThis command is not supported.7FD4
OutputNot outputOutputNot
output
A Cnt Ac-S Z or TCA copy pair
status cannot be changed. Possible
8C12
reasons include one or more of the
following:
• The specified S-VOL is online.
• The specified volume is either a
Cnt Ac-S Z or TCA pair volume,
or the S-VOL of a BC Z copy
pair.
• All paths to the RCU are blocked.
• The status of the copy pair is not
possible for the requested
transition (it is possible that it is
already in requested copy pair
status).
• The logical volume of the
specified volume is blocked.
• The path between the primary site
and the secondary site is in the
BUSY status.
• The emulation type of the P-VOL
and the S-VOL do not match.
Alternatively, the number of
cylinders in the S-VOL is less than
the P-VOL.
• Either the status of the P-VOL is
being changed, or there is a
copy pair in the group with the
status being changed.
• The command could not be
executed because the specified
Cnt Ac-S Z or TCA volume is in
the SIMPLEX status.
• The S-VOL is not in the
SWAPPING status.
• Either the status of the P-VOL is
being changed, or there is a
copy pair in the group with the
status being changed.
190 Storage System Sense Byte Information