HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 56 Details of Error Codes 7Fxx – 8Cxx (continued)
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
• A copy pair cannot be made
because the same C/T group ID
is set in both the MCU and RCU.
• The specified C/T group ID is not
registered.
• Alternatively, a path cannot be
defined and deleted because
either the copy pair status or the
parameter is invalid. (The
possible reasons are documented
by error codes C120 to C12F.)
OutputNot outputThe command could not be executed
because in the instruction to transfer
8CE8
to a remote DKC, there is an error
in the parameter specification for the
host command.
OutputNot outputThe command could not be executed
because the path for the remote DKC
control function is not set.
8CE9
Not outputOutputNot outputThe command could not be executed
because the path for the Remote
DKC Control Function is not set.
8CEB
Not outputOutputNot outputThe command could not be executed
because in the instruction to transfer
8CFB
to a remote storage system, there is
an error in the storage system serial
number.
Not outputOutputNot outputThe command could not be executed
because the command device is not
defined.
8CFC
Table 57 Details of Error Codes 8Dxx
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
Not
output
OutputNot outputA path cannot be established
because there is an invalid
parameter.
8D00
• The storage system serial
number is incorrect.
• The SSID is incorrect.
• The CU number is not
supported.
Not
output
OutputNot outputA path cannot be established
because there is an invalid
8D01
parameter. Alternatively, path
establishment is not supported.
Not
output
OutputNot outputA path cannot be deleted because
there is an invalid parameter.
8D09
Alternatively, path deletion is not
supported.
Details of Error Codes 191