HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)
Table Of Contents
- P9000 for Business Continuity Manager Software Messages
- Contents
- 1 Messages
- 2 Storage System Sense Byte Information
- 3 Support and other resources
- Glossary
Table 57 Details of Error Codes 8Dxx (continued)
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
For details, see error code
2310.
• The charging limit of the
program product was
exceeded.
• The copy pair is in the Pending
status.
• The copy pair is not in the Split
status.
• The specified C/T group ID is
not registered.
Not outputOutputThe command could not be
executed because the BC Z, Cnt
8D17
Ac-S Z, or TCA program product
is not installed.
Not outputOutputNot
output
The command could not be
executed because the volume
8D1A
specified by the host command
parameter is the S-VOL.
Not outputOutputNot
output
A status cannot be changed
because the status of the specified
8D1B
copy pair does not match the
actual status.
Not outputOutputNot
output
A Cnt Ac-S Z or TCA copy pair
cannot be made or resynchronized.
8D1C
Possible reasons include one or
more of the following:
• The P-VOL is a command
device.
• The specified serial number of
the primary storage system or
SSID does not match the storage
system serial number or SSID of
the local CU.
• The specified P-VOL does not
match the bootup volume.
• The C/T group ID is incorrect.
• The P-VOL has not been made
in the corresponding C/T
group.
• The S-VOL is not in the Reverse
Resync status.
• Either C/T group ID or the C/T
group timer type is incorrect.
Not outputOutputA BC Z copy pair cannot be made
or resynchronized. Possible reasons
8D1D
include one or more of the
following:
• The S-VOL is online.
• The status of the copy pair does
not allow the status transition.
Details of Error Codes 193