HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 57 Details of Error Codes 8Dxx (continued)
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
For details, see error code
2310.
• The P-VOL is online.
• The charging limit of the
program product was
exceeded.
• The copy pair is in the Pending
status.
• The copy pair is not in the Split
status.
• The specified C/T group ID is
not registered.
• The number of copy pairs in the
specified C/T group ID exceeds
the maximum number.
YNNNNNNThe serial numbers for the primary
and the secondary storage systems
8D1E
in the host command parameter is
incorrect.
Not outputOutputThe host command parameter is
incorrect.
8D20
Not outputOutputNot outputThe command cannot be executed
because the volume specified by
8D21
the host command parameter is in
the NOT READY status.
Not outputOutputNot outputThe command cannot be executed
because the logical volume of the
8D22
volume specified by the host
command parameter is blocked.
Not outputOutputThe command could not be
executed because the Cnt Ac-S Z,
8D25
TCA, or BC Z program product is
not installed.
Not outputOutputA BC Z copy pair cannot be
suspended. Possible reasons
8D26
include one or more of the
following:
• The status of the copy pair does
not allow the status transition.
For details, see error code
2310.
• The copy pair is in the SIMPLEX
status.
• The copy pair is in the Split
status.
• The specified C/T group ID is
not registered.
Not outputOutputA BC Z copy pair cannot be
suspended. Possible reasons
8D27
194 Storage System Sense Byte Information