HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)
Table Of Contents
- P9000 for Business Continuity Manager Software Messages
- Contents
- 1 Messages
- 2 Storage System Sense Byte Information
- 3 Support and other resources
- Glossary
Table 57 Details of Error Codes 8Dxx (continued)
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
include one or more of the
following:
• The status of the copy pair does
not allow the status transition.
For details, see error code
2310.
• The copy pair is in the SIMPLEX
status.
• The copy pair is in the Split
status.
• The specified C/T group ID is
not registered.
Not outputOutputNot
output
The command cannot be executed
because the copy types of the
specified copy pair do not match.
8D28
Not outputOutputNot
output
A Cnt Ac-S Z or TCA copy pair
cannot be suspended. Possible
8D29
reasons include one or more of the
following:
• The specified volume is in the
SIMPLEX status.
• The P-VOL number in the
parameter and bootup volume
number do not match.
• The S-VOL number in the
parameter is incorrect.
• The serial number or SSID of the
primary storage system in the
parameter does not match the
storage system serial number or
SSID of the local CU.
• The serial number or SSID of the
secondary storage system in the
parameter does not match the
storage system serial number or
SSID of the RCU.
• The S-VOL number in the
parameter and bootup volume
number do not match.
• The serial number or SSID of the
secondary storage system in the
parameter does not match the
storage system serial number or
SSID of the local CU.
• SVOL(PERMIT)/Reverse
Resync is not supported.
• The specified volume is the
P-VOL.
• It is already in the suspend
status.
• The S-VOL is in the Pending
status.
Details of Error Codes 195