HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)
Table Of Contents
- P9000 for Business Continuity Manager Software Messages
- Contents
- 1 Messages
- 2 Storage System Sense Byte Information
- 3 Support and other resources
- Glossary
Table 59 Details of Error Codes C0xx (continued)
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
Not outputOutputNot
output
The P-VOL number in the Cnt Ac-S
Z or TCA parameter does not
match the bootup volume number.
C06D
Not outputOutputNot
output
The serial number or SSID of the
primary storage system in the Cnt
C06E
Ac-S Z or TCA parameter does not
match the storage system serial
number or SSID of the local CU.
Not outputOutputNot
output
The serial number or SSID of the
primary storage system in the Cnt
C06F
Ac-S Z or TCA parameter does not
match the storage system serial
number or SSID of the local CU.
Not outputOutputNot
output
The serial number or SSID of the
secondary storage system in the
C072
Cnt Ac-S Z or TCA parameter does
not match the storage system serial
number or SSID of the RCU.
Not outputOutputNot
output
The serial number or SSID of the
secondary storage system in the
C073
Cnt Ac-S Z or TCA parameter does
not match the storage system serial
number or SSID of the RCU.
Not outputOutputNot
output
No Cnt Ac-S Z copy pair can be
made because the Cnt Ac-S Z
program product is not installed
C074
Not outputOutputNot
output
The S-VOL number in the Cnt Ac-S
Z or TCA parameter does not
match the bootup volume number.
C078
Not outputOutputNot
output
The serial number or SSID of the
secondary storage system in the
C079
Cnt Ac-S Z or TCA parameter does
not match the storage system serial
number or SSID of the RCU.
Not outputOutputNot
output
The serial number or SSID of the
secondary storage system in the
C07A
Cnt Ac-S Z or TCA parameter does
not match the storage system serial
number or SSID of the RCU.
Not outputOutputNot
output
The S-VOL number in the Cnt Ac-S
Z or TCA parameter is incorrect.
C0A1
Not outputOutputNot
output
The S-VOL number in the Cnt Ac-S
Z or TCA parameter is incorrect.
C0A2
Not outputOutputNot
output
The command could not be
executed because the specified
volume is in the SIMPLEX status.
C0B6
Not outputOutputNot
output
A copy pair cannot be suspended
because it is already in the suspend
status.
C0C5
Not outputOutputNot
output
The command could not be
executed because it is already in
the SIMPLEX status.
C0C6
Details of Error Codes 205