HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 60 Details of Error Codes C1xx (continued)
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
Not
output
OutputNot outputThe command could not be
executed because the
C12A
device-identifying code of an RCU
for which path deletion is specified
is invalid, or because the RCU type
(FIBRE/ESCON) is invalid.
Not
output
OutputNot outputThe command could not be
executed because there are one or
C12B
more paths that have a different
serial number.
Not
output
OutputNot outputThe command could not be
executed because automatic port
C12C
switching cannot be performed for
the specified path.
Not
output
OutputNot outputThe command could not be
executed because the
C12D
device-identifying code of an RCU
for which path registration is
specified is invalid, or because the
RCU type (FIBRE/ESCON) is
invalid.
Not
output
OutputNot outputThe command could not be
executed because all CU numbers
C12E
of an RCU for which path creation
or deletion is specified are not the
same.
Not
output
OutputNot outputThe command cannot be executed.
The reason might be one of the
following:
C12F
• The specified CU number is not
defined.
• An LDEV is not defined for the
specified CU number.
Not outputOutputNot
output
A copy pair cannot be
resynchronized because the
C162
corresponding bootup pair is not
in the suspend status.
Not outputOutputNot
output
A copy pair cannot be dissolved
because an attempt to change the
S-VOL status failed.
C184
Not outputOutputNot
output
A Cnt Ac-S Z or TCA copy pair
cannot be dissolved because the
copy pair status is invalid.
C189
Not outputOutputNot
output
The copy pair cannot be dissolved.
The reason might be one of the
following:
C18A
• The status of the bootup volume
is being changed.
• There is a copy pair in the
group that has a status that is
being changed.
Details of Error Codes 207