HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 62 Details of Error Codes C3xx (continued)
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
Not outputOutputNot
output
Formatting of the logical volume is
being performed on the P-VOL.
C31D
Not outputOutputNot
output
The P-VOL is in the READ ONLY
status.
C31E
Not outputOutputNot
output
The logical path between the MCU
and the RCU is not set (number of
path = 0).
C320
Not outputOutputNot
output
The condition setting for the number
of the Minimum Path between the
MCU and the RCU is invalid.
C321
Not outputOutputNot
output
The MCU is a storage system type
that is not supported by Cnt Ac-S
Z or TCA.
C322
Not outputOutputNot
output
The RCU sequence (number, SSID
or CU) is incorrect.
C324
Not outputOutputNot
output
The RCU is not NVS ON.C325
Not outputOutputNot
output
The subsystem level cache of the
RCU is not valid.
C326
Not outputOutputNot
output
A copy pair cannot be made
because the status of the P-VOL
does not permit remote copy.
C327
Not outputOutputNot
output
The track format of the P-VOL and
S-VOL do not match.
C328
Not outputOutputNot
output
The S-VOL is protected by LDEV
security.
C32A
Not outputOutputNot
output
The P-VOL is protected by LDEV
security.
C32B
Not outputOutputNot
output
The S-VOL is protected by LDEV
guard.
C32C
Not outputOutputNot
output
A copy pair cannot be made
because connection with the
specified S-VOL is not supported.
C32E
Not outputOutputNot
output
The condition for the number of
cylinders for Cnt Ac-S Z or TCA
C32F
volumes is incorrect (the number of
cylinders in the P-VOL > the number
of cylinders in the S-VOL).
Not outputOutputNot
output
The condition for the Cnt Ac-S Z or
TCA volume capacity is incorrect
(not P-VOL=S-VOL).
C330
Not outputOutputNot
output
The device level cache of the S-VOL
is not valid.
C332
Not outputOutputNot
output
The S-VOL is not DFW ON.C333
Not outputOutputNot
output
The S-VOL is a TCA P-VOL.C335
Details of Error Codes 211