HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 62 Details of Error Codes C3xx (continued)
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
Not outputOutputNot
output
The specified SSID, or CU number
of the RCU is incorrect.
C3D3
Not outputOutputNot
output
The specified S-VOL cannot be
used because the device cannot be
C3D6
recognized from the connection
port.
Not outputOutputNot
output
The status of the S-VOL in the RCU
is incorrect.
C3D7
Not outputOutputNot
output
A Cnt Ac-S Z/TCA copy pair
cannot be made because the
C3D8
volume specified to be the S-VOL
is a system residence volume.
Not outputOutputNot
output
A copy pair cannot be created
because the THP Z volume
C3D9
specified for the S-VOL satisifes one
of the following conditions:
• The THP Z volume is being used
by another program.
• The capacity is being changed.
• The pages are being released.
• The pool is being initialized.
Not outputOutputNot
output
A Cnt Ac-S Z/TCA copy pair
cannot be made because the
C3DA
volume specified to be the S-VOL
is a system residence volume.
Not outputOutputNot
output
The S-VOL is not in the suspend
status.
C3DB
Not outputOutputNot outputA copy pair cannot be made
because TCA and Cnt Ac-S Z
cannot be specified simultaneously.
C3FE
OutputNot OutputOutputNot
output
Commands that use Cnt Ac-S Z
copy pairs, Cnt Ac-J Z copy pairs,
C825
or the Remote DKC Control
Function cannot be executed
because the number of executable
paths is less than the minimum
value.
Table 63 Details of Error Codes CBxx
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
Not outputOutputNot outputA copy pair cannot be made
because there was an attempt to
CB10
make a copy pair for both
directions with the same C/T group
ID.
Not outputOutputNot outputA copy pair cannot be added to a
C/T group where the P-VOL and
the S-VOL are being swapped.
CB18
216 Storage System Sense Byte Information