HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 63 Details of Error Codes CBxx (continued)
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
Ac-J Z is 0 when linked with Cnt
Ac-J Z.
Not outputOutputNot
output
A Cnt Ac-S Z copy pair cannot be
made because a Cnt Ac-J Z copy
CBDD
pair is being copied in a Cnt Ac-J
Z Multi-Target configuration.
Not outputOutputNot
output
A copy pair cannot be created
because the specified P-VOL is a
pool volume.
CBE2
Not outputOutputNot
output
A copy pair cannot be created
because the specified S-VOL is a
pool volume.
CBE3
Not outputOutputNot
output
A Cnt Ac-S Z copy pair cannot be
made. The reason might be:
CBED
The specified S-VOL is the S-VOL
of a Cnt Ac-J Z copy pair.
Not outputOutputNot
output
A Cnt Ac-S Z copy pair cannot be
made because the specified P-VOL
CBEE
is part of the Cnt Ac-J Z and delta
resync Cnt Ac-J Z copy pairs.
Table 64 Details of Error Codes DBxx – E8xx
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
Not outputOutputNot outputA Cnt Ac-J Z copy pair status
cannot be changed because the
status transition is not allowed.
DB02
In the following examples, status
transition is not allowed:
• When an attempt to create a
copy pair is made for a copy
pair whose status is not
SIMPLEX.
• When an attempt to re-create a
copy pair is made for a copy
pair whose status is not in the
suspend status.
Check the status of the copy pair
again because there is a possibility
that status transition has been
performed correctly.
Not outputOutputNot outputA Cnt Ac-J Z copy pair status
cannot be changed because the
DB03
copy pair status is being changed
(Suspending or Deleting).
Not outputOutputNot outputA Cnt Ac-J Z copy pair status
cannot be changed because the
power-on process is in progress.
DB07
218 Storage System Sense Byte Information