HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 66 Details of Error Codes EBxx (continued)
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
specified device is not an
arbitration command device.
Not outputOutputNot outputA delta resync pair cannot be
made because the S-VOL of the
EB24
specified copy pair is in one of
the following statuses:
• It is not the S-VOL of a Cnt Ac-J
Z delta resync copy pair.
• The status of the Cnt Ac-J Z
delta resync copy pair is not
Duplex.
Not outputOutputNot outputA delta resync pair cannot be
executed because the S-VOL of
EB25
the specified copy pair is in one
of the following statuses.
• It is not the S-VOL of a Cnt Ac-J
Z delta resync copy pair.
• The status of the Cnt Ac-J Z
delta resync copy pair is not
Duplex, SuspOp, SuspEr, or
SuspCu.
Not outputOutputNot outputA Cnt Ac-J Z copy pair that is to
be linked with Cnt Ac-S Z cannot
EB28
be made because the Disaster
Recovery Extended program
product has not been installed in
the RCU.
Not outputOutputNot outputA Cnt Ac-J Z copy pair status
cannot be changed because the
specified mirror ID is invalid.
EB30
Not outputOutputNot outputWhen making a copy pair using
the same journal group number
EB38
and mirror ID as an existing copy
pair, you cannot specify a
secondary storage system that
differs from the secondarystorage
system of the existing copy pair.
Therefore, a Cnt Ac-J Z copy pair
cannot be made.
This error occurs if there is more
than one secondary storage
system in the same copy group or
when the specified journal group
number and mirror ID are used
for another copy group.
Not
output
OutputNot outputThe batch pair status command
cannot be executed because the
EB3B
CU number specified by the
YKEWAIT command or YKRSCAN
command is not supported by this
model.
Not outputOutputNot outputA Cnt Ac-J Z copy pair status
cannot be changed because the
EB3C
specified serial number or SSID
Details of Error Codes 227