HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 66 Details of Error Codes EBxx (continued)
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
made because the LDEV guard is
EB5B
set for the specified P-VOL or
S-VOL.
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
made because the LDEV security
EB5D
is set for the specified P-VOL or
S-VOL.
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
made because the S-VOL is not in
EB5E
the SIMPLEX status. Alternatively,
a Cnt Ac-J Z copy pair cannot be
resynchronized because the
S-VOL is not in the suspend status.
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
made because the Cnt Ac-J Z
EB5F
program product is not installed
on the secondary storage system.
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
made because the capacities of
EB60
the P-VOL and S-VOL do not
match.
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
made because the path between
EB61
the primary storage system and
the secondary storage system is
invalid.
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
made because the specified
P-VOL is a command device.
EB62
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
made because another journal
EB63
group pair has been already
made in the R-JNL group.
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
made because the charging limit
EB64
of the program product has been
exceeded.
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
created because the specified
EB6B
S-VOL satisfies one of the
following conditions:
• The S-VOL is being used for
FlashCopy.
• The S-VOL is being used for
FlashCopy SE.
• The S-VOL is a TSE-VOL.
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
made because the Cnt Ac-J Z
EB6E
program product is not installed
on the primary storage system.
Details of Error Codes 229