HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 66 Details of Error Codes EBxx (continued)
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
made. The reason might be one
of the following:
EB87
• The path from the secondary
storage system to the primary
storage system is not set.
• The S-VOL is in the SIMPLEX
status.
Not outputOutputNot outputA Cnt Ac-J Z copy pair could not
be made because of one the
following reasons:
EB88
• The specified S-VOL is already
being used as the S-VOL of a
BC Z copy pair.
• The specified volume is in Not
Ready status.
• The LDEV guard (PROTECT) is
set for the S-VOL.
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
made because the emulation
EB89
types of the specified P-VOL and
S-VOL do not match.
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
made because the emulation
EB8A
types of the specified M-JNL
group and R-JNL group do not
match.
Not outputOutputNot outputA Cnt Ac-J Z copy pair status
cannot be changed because the
EB94
status of the specified copy pair
does not allow the status
transition.
Not outputOutputNot outputA Cnt Ac-J Z copy pair status
cannot be changed because the
specified S-VOL is not installed.
EBA0
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
made because the THP Z volume
EBA7
specified for the S-VOL satisfies
one of thefollowing conditions:
• The capacity is being
expanded.
• The pages are being released.
• The pool of the corresponding
THP Z is being initialized.
Not outputOutputNot outputThe command could not be
executed because the remote
EBA8
command has been issued to a
volume that is not installed.
Not outputOutputNot outputThe remote command cannot be
executed because the command
device has not been defined.
EBB3
Details of Error Codes 231