HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 2 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKA0x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
No copy pair information was acquired from the volume to which
the device number was assigned.
No information was
acquired for
DEVN=device-number
YKB200W TSO
There might not be a volume for the specified device number. If the
volume exists for the specified device number, check the channel
settings.
device-number
Device number assigned to the volume from
which no copy pair information was acquired
No copy pair information was acquired from the volume to which
the device number Devn was assigned because no I/O paths are
available. Verify the I/O path settings.
No I/O paths are available
for the specified devices.
DEVN=Devn
YKB201W TSO
Devn
The device number of the volume whose
information acquisition was skipped
A P-VOL not defined in the disk configuration definition file was
detected among the PPRC copy pairs detected by the YKP2B
command.
Unable to resolve primary
volume information.
Pair=CopyType,
DEVN=Devn,
YKB202W TSO
Check whether the detected P-VOL is defined in the disk
configuration definition file.
SN=SerialNum, CU=CU#,
CCA= CCA#
CopyType
The copy type of the detected undefined volume
Devn
The device number of the detected undefined
volume
SerialNum
The storage system serial number of the detected
undefined volume
CU#
The control unit number of the detected
undefined volume
CCA#
The command control address number of the
detected undefined volume
An S-VOL not defined in the disk configuration definition file was
detected among the PPRC copy pairs detected by the YKP2B
command.
Unable to resolve secondary
volume information.
Pair=CopyType,
SN=SerialNum, CU=CU#,
CCA= CCA#
YKB203W TSO
Check whether the detected S-VOL is defined in the disk
configuration definition file.
CopyType
The copy type of the detected undefined volume
SerialNum
The storage system serial number of the detected
undefined volume
CU#
The control unit number of the detected
undefined volume
CCA#
List of Messages 31