HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 2 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKA0x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
The command control address number of the
detected undefined volume
A dynamic change was detected in an I/O configuration definition
while the YKP2B command was executing with CHECK specified
for the HS parameter.
A dynamic configuration
change was detected.
DEVN=device-number
YKB204W TSO
Check the status of the device targeted by the YKP2B command,
correct any errors in the configuration or execution conditions, and
then re-execute the command.
device-number
Device number being processed when a dynamic
change was detected in an I/O configuration
definition
Invalid parameters are specified.Supplied parameters invalidYKC000T TSO
RC=48
For details, see the reason code in the YKC099I message displayed
after this message. For reason codes, see IKJPARS in the TSO/E
Programming Services.
Nothing is assigned to the ARRAYS parameter.No controller ARRAYS()
supplied
YKC001E MSG
SC=48 RC=48
Nothing is assigned to the MSG parameter.No message MSG() suppliedYKC001E TSO
RC=48
Nothing is assigned to the STEM parameter.No results STEM() suppliedYKC001E MSG
SC=48 RC=48
Nothing is assigned to the FROM parameter.No starting FROM() suppliedYKC001E MSG
SC=48 RC=48
Table 3 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKC0x)
Explanation and Recommended ActionsMessage TextMessage ID
Invalid parameters are specified.Supplied parameters invalidYKC000T TSO
RC=48
For details, see the reason code in the YKC099I message displayed
after this message. For reason codes, see IKJPARS in the TSO/E
Programming Services.
Nothing is assigned to the ARRAYS parameter.No controller ARRAYS()
supplied
YKC001E MSG
SC=48 RC=48
Nothing is assigned to the MSG parameter.No message MSG() suppliedYKC001E TSO
RC=48
Nothing is assigned to the STEM parameter.No results STEM() suppliedYKC001E MSG
SC=48 RC=48
Nothing is assigned to the FROM parameter.No starting FROM() suppliedYKC001E MSG
SC=48 RC=48
The last character of the ARRAYS parameter is not a period.Controller ARRAYS(stem) does
not include trailing "."
YKC002E MSG
SC=48 RC=48
stem
Stem name assigned to the ARRAYS parameter
The last character of the MSG parameter is not a period.Messages MSG(stem) does
not include trailing "."
YKC002E TSO
RC=48
stem
32 Messages