HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 3 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKC0x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
Check the disk configuration definition file after the scan is
complete. If the volume serial number is different from the one in
the actual configuration, re-execute the scan.
The YKSCAN command terminated with the return code nnnn and
the reason code rrrr.
YKSCAN command return
code=nnnn, reason code=rrrr
YKC099I TSO
This message is always displayed to indicate the return code and
the reason code.
nnnn
Maximum among the severity codes returned
during command execution
Table 4 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKD0x)
Explanation and Recommended ActionsMessage TextMessage ID
Invalid parameters are specified.Supplied parameters invalidYKD000T TSO
RC=48
For details, see the reason code in the YKD099I message that will
appear after this message. For reason codes, see IKJPARS in the
TSO/E Programming Services.
Nothing is assigned to the MSG parameter.No message MSG() suppliedYKD001E TSO
RC=48
Nothing is assigned to the STEM parameter.No results STEM() suppliedYKD001E MSG
SC=48 RC=48
The last character of the STEM parameter is not a period.Copy Group STEM(stem)
does not include trailing "."
YKD002E MSG
SC=48 RC=48
stem
Stem name assigned to the STEM parameter
The value assigned to the DEVN parameter is invalid.DEVN() value invalidYKD002E MSG
SC=48
The last character of the MSG parameter is not a period.Messages MSG(stem) does
not include trailing "."
YKD002E TSO
RC=48
stem
Stem name assigned to the MSG parameter
The value specified in the DEVN parameter is not in hexadecimal
format.
DEVN() not valid hexYKD008E MSG
SC=48
Access to the REXX variable identified by name failed.REXX failure return
code=nnnn starting with
variable name
YKD010E TSO
RC=40
For details about the return code, see IKJCT441 in the TSO/E
Programming Services.
nnnn
Error code returned upon REXX access
The specified copy group attribute value is invalid for this command.Invalid Copy Group attribute
name
YKD050E MSG
SC=36 RC=48
(attribute-value)
Correct the value and then re-execute the command.
name
REXX variable name
attribute-value
REXX variable value
34 Messages