HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 8 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKG2x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
Number of the line in the file identified by file
where the error was detected
The XML element name is missing.name element missing.YKG277E MSG
SC=36 RC=36
(file:rec#)
Correct the specification on the line with the line number identified
by rec# in the file identified by file.
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
The disk device element's SerialNum must be the same as the
SerialNum value (HDASN) of the disk configuration element, but
DDSN is defined for this value.
Serial Number HDASN is
required, but Serial Number
DDSN is found.
YKG285E MSG
SC=36 RC=36
(file:rec#)
Correct the specification on the line with the line number identified
by rec# in the file identified by file.
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
A device address domain ID created by a remote scan or NG scan
is specified.
Specify the local DAD ID of
the primary site for the
DAD() parameter.
YKG286E MSG
SC=36 RC=36
(file:rec#)
Specify the local device address domain ID of the primary site in
the DAD parameter. For details about the NG scan, see the HP
P9000 for Business Continuity Manager Software Reference Guide.
file
Name of the XML file where the error was
detected
rec#
Number of the line where the error was detected
in the file identified by file
An attempt to acquire the variable vn failed with the result value
identified by result. This error can be caused by an invalid value
being specified for the STEM parameter.
YKVGET program failure for:
vn
YKG290E MSG
SC=44 RC=44
(result)
The internal routine encountered a shortage of work space.The element stack was
overflowed.
YKG295E MSG
SC=44 RC=44
(file:rec#)
Contact technical support for assistance.
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
List of Messages 45