HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 10 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKL2x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
The internal routine encountered a shortage of work space. Contact
technical support for assistance.
The element stack was
overflowed.
YKL295E MSG
SC=44 RC=44
(file:rec#)
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
An unexpected error has occurred. This error might have occurred
with another error.
CLI-name encountered an
unexpected error.
YKL298E MSG TSO
SC=44 RC=44
(detailed-info)
If another error message was output at the same time as this one,
follow the instructions in that message to fix the corresponding
problem.
If no other error message was output, collect the following materials
and contact service representative:
• The script from which this command was executed (not
necessary if this command was executed from the ISPF panel).
• The ISPF log (not necessary if this command was executed from
a script).
• The definition files operated on from the script or ISPF panel
(the copy group definition file, disk configuration definition file,
command device definition file and route list definition file).
CLI-name
The name of the executed CLI command
detailed-info
Detailed information to assist service
representative in resolving the problem
The values attribute1 and attribute2 conflict.The values of attribute1 and
attribute2 conflict.
YKL419E MSG
SC=48 RC=48
Make sure that both of these values are valid, and then retry the
operation.
attribute1
Attribute name 1 included in the copy group
definition
attribute2
Attribute name 2 included in the copy group
definition
Table 11 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKM0x)
Explanation and Recommended ActionsMessage TextMessage ID
Invalid parameters are specified.Supplied parameters invalidYKM000T TSO
RC=48
For details, see the reason code in the YKM099I message that
will appear after this message. For reason codes, see IKJPARS
in the TSO/E Programming Services.
Nothing is assigned to the MSG parameter.No message MSG() suppliedYKM001E TSO
RC=48
List of Messages 67