HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 13 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKM7x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
value-length
Input length
Enter the hexadecimal characters (0-9, A-F, a-f).Enter the number (hex.
characters: 0-9, A-F, a-f).
YKM725E ISPF
Enter a numeric value (0-9).Enter the number (numerical
characters: 0-9).
YKM726E ISPF
A range cannot be specified for the field.Range specification is not
supported for the field.
YKM727E ISPF
A line that matches the specified pattern was not found.The specified pattern produced
no matching lines.
YKM728E ISPF
An error occurred in the ISPF service.ISPF service error occurred.
info
YKM731E
info
Maintenance information
Serial numbers must be a 5-digit combination of alphanumeric
characters.
Serial number must be a 5-digit
combination of alphanumeric
characters.
YKM750E ISPF
The device address domain ID must be a combination of one
or more qualifiers. Each qualifier must be from 1 to 8
DADID must be a combination
of one or more qualifiers. Each
YKM751E ISPF
alphanumeric characters (0-9, A-Z, a-z), and must begin withqualifier must be 1-8
an alphabetic character (A-Z, a-z). The length of the device
address domain ID must be from 1 to 28 characters.
alphanumeric characters (0-9,
A-Z, a-z) with the first character
being an alphabetic character
(A-Z, a-z). The length of DADID
must be 1-28.
The device number must be a four-digit hexadecimal number
(0-9, A-F, a-f).
DEVN must be 4 hexadecimal
characters (0-9, A-F, a-f).
YKM752E ISPF
The APID must be a four-digit hexadecimal number (0-9, A-F,
a-f).
APID must be 4 hexadecimal
characters (0-9, A-F, a-f).
YKM753E ISPF
The route list ID must be a combination of one or more qualifiers.
Each qualifier must be from 1 to 8 alphanumeric characters
Route List ID must be a
combination of one or more
YKM754E ISPF
(0-9, A-Z, a-z), and must begin with an alphabetic characterqualifiers. Each qualifier must
(A-Z, a-z). The length of the route list ID must be from 1 to 8
characters.
be 1-8 alphanumeric
characters (0-9, A-Z, a-z) with
the first character being an
alphabetic character (A-Z, a-z).
The length of Route List ID must
be 1-8.
The prefix of the configuration file name must be a combination
of one or more qualifiers. Each qualifier must be from 1 to 8
Configuration File Prefix must
be a combination of one or
YKM755E ISPF
alphanumeric characters (0-9, A-Z, a-z), and must begin withmore qualifiers. Each qualifier
an alphabetic character (A-Z, a-z). The length of the
configuration file name prefix must be from 1 to 16 characters.
must be 1-8 alphanumeric
characters (0-9, A-Z, a-z) with
the first character being an
alphabetic character (A-Z, a-z).
The length of Configuration File
Prefix must be 1-16.
The copy group ID must be a combination of one or more
qualifiers. Each qualifier must be from 1 to 8 alphanumeric
Copy Group ID must be a
combination of one or more
YKM756E ISPF
characters (0-9, A-Z, a-z), and must begin with an alphabeticqualifiers. Each qualifier must
character (A-Z, a-z). The length of the copy group ID must be
from 1 to 40 characters.
be 1-8 alphanumeric
characters (0-9, A-Z, a-z) with
List of Messages 75