HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 16 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKP0x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
The last character of the MSG parameter is not a period.Messages MSG(stem) does not
include trailing "."
YKP002E TSO RC=48
stem
Stem name assigned to the MSG parameter
The YKSTATS command was executed on a copy group that
is neither TCA nor Cnt Ac-J Z. This command works only on
TCA or Cnt Ac-J Z copy groups.
This command is only valid for
TCA or CAJ Copy Groups
YKP002E MSG SC=48
RC=48
Check that the command can be executed on this copy group,
and then re-execute the command.
The TCA copy group on which the YKSTATS command has
been executed contains an unsupported IFType.
Some storage systems in this
Copy Group do not support
TCA statistics reports
YKP003E MSG SC=48
RC=48
Check that the command can be executed on this copy group,
and then re-execute the command.
Access to the REXX variable indicated by name failed.REXX failure return code=nnnn
starting with variable name
YKP010E TSO RC=40
For details about the return code, see IKJCT441 in the TSO/E
Programming Services.
nnnn
Error code for REXX access
The storage system identified by serial-number is paired with
more than four storage systems within the C/T group.
The storage system
(serial-number) pairs with more
than 4 storage systems.
YKP065E MSG SC=36
RC=36
Correct the copy pair configuration within the C/T group.
serial-number
storage system serial number (12 digits)
The YKSTATS command terminated with the return code nnnn
and the reason code rrrr.
YKSTATS command return
code=nnnn, reason code=rrrr
YKP099I TSO
This message is always displayed to indicate the return code
and the reason code.
nnnn
Maximum among the severity codes
returned during command execution
Table 17 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKQ0x)
Explanation and Recommended ActionsMessage TextMessage ID
Invalid parameters are specified.Supplied parameters invalidYKQ000T TSO RC=48
For details, see the reason code in the YKQ099I message
that will appear after this message. For reason codes, see
IKJPARS in the TSO/E Programming Services.
Nothing is assigned to the MSG parameter.No message MSG() suppliedYKQ001E TSO RC=48
Nothing is assigned to the STEM parameter.No results STEM() suppliedYKQ001E MSG
SC=48 RC=48
The last character of the STEM parameter is not a period.Copy Group STEM(stem) does
not include trailing "."
YKQ002E MSG
SC=48 RC=48
stem
List of Messages 79