HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 17 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKQ0x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
Stem name assigned to the STEM
parameter
The value assigned to the DEVN parameter is invalid.DEVN() value invalidYKQ002E MSG
SC=48
The last character of the MSG parameter is not a period.Messages MSG(stem) does not
include trailing "."
YKQ002E TSO RC=48
stem
Stem name assigned to the MSG
parameter
The parameter combination is invalid.Parameters combination is
invalid
YKQ003E MSG
SC=48
The value specified in the DEVN parameter is not in
hexadecimal format.
DEVN() not valid hexYKQ008E MSG
SC=48
Access to the REXX variable indicated by name failed.REXX failure return code=nnnn
starting with variable name
YKQ010E TSO RC=40
For details about the return code, see IKJCT441 in the
TSO/E Programming Services.
nnnn
Error code for REXX access
In an BC Z copy group, the volume in the target copy pair
has already been paired with three volumes other than the
pairing volume specified in the copy group definition.
BC Z PAIR deficiency. DEVN
device#(SN,CU#,CCA#)
YKQ018E MSG
SC=16 RC=16
(pair-index)
Review the applicable copy pair definition in the copy group
definition.
device#
Device number
If the device cannot be identified, ****
is displayed.
SN
Storage system serial number
If the device cannot be identified,
************ is displayed.
CU#
Control unit number
If the device cannot be identified, ** is
displayed.
CCA#
Command control address number
If the device cannot be identified, ** is
displayed.
pair-index
See the pair index description in the
explanation of the YKE003E message.
Although the P-VOL is online, the current volume serial
number does not match the volume serial number defined
for the copy group. Processing will continue.
Primary volume serial changed.
DEVN device#(SN,CU#,CCA#)
YKQ019W MSG
SC=12 RC=0
(pair-index)
80 Messages