HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 17 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKQ0x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
Check that the copy group indicates the correct volumes
and is not being used for other purposes.
device#
Device number
If the device cannot be identified, ****
is displayed.
SN
Storage system serial number
If the device cannot be identified,
************ is displayed.
CU#
Control unit number
If the device cannot be identified, ** is
displayed.
CCA#
Command control address number
If the device cannot be identified, ** is
displayed.
pair-index
See the pair index description in the
explanation of the YKE003E message.
Check that the S-VOL status is SIMPLEX.TCA or BC Z Primary is simplex,
secondary not. DEVN
device#(SN,CU#,CCA#)
YKQ021E MSG
SC=12 RC=20
(pair-index)
device#
Device number
If the device cannot be identified, ****
is displayed.
SN
Storage system serial number
If the device cannot be identified,
************ is displayed.
CU#
Control unit number
If the device cannot be identified, ** is
displayed.
CCA#
Command control address number
If the device cannot be identified, ** is
displayed.
pair-index
See the pair index description in the
explanation of the YKE003E message.
The volume serial number of the P-VOL cannot be obtained
because the P-VOL is offline.
Primary volume is offline. DEVN
device#(SN,CU#,CCA#)
YKQ026W MSG SC=8
RC=8 (pair-index)
List of Messages 81