HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 17 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKQ0x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
Check that the copy group indicates the correct volumes
and is not being used for other purposes, make the P-VOL
online, and then re-execute the YKQUERY command.
device#
Device number
If the device cannot be identified, ****
is displayed.
SN
Storage system serial number
If the device cannot be identified,
************ is displayed.
CU#
Control unit number
If the device cannot be identified, ** is
displayed.
CCA#
Command control address number
If the device cannot be identified, ** is
displayed.
pair-index
See the pair index description in the
explanation of the YKE003E message.
The YKQUERY command terminated with the return code
nnnn and the reason code rrrr.
YKQUERY command return
code=nnnn, reason code=rrrr
YKQ099I TSO
This message is always displayed to indicate the return code
and the reason code.
nnnn
Maximum among the severity codes
returned during command execution
Table 18 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKR0x)
Explanation and Recommended ActionsMessage TextMessage ID
Invalid parameters are specified.Supplied parameters invalidYKR000T TSO RC=48
For details, see the reason code in the YKR099I message
that will appear after this message. For reason codes, see
IKJPARS in the TSO/E Programming Services.
Nothing is assigned to the MSG parameter.No message MSG() suppliedYKR001E TSO RC=48
Nothing is assigned to the STEM parameter.No results STEM() suppliedYKR001E MSG SC=48
RC=48
The last character of the STEM parameter is not a period.Copy Group STEM(stem) does
not include trailing "."
YKR002E MSG SC=48
RC=48
stem
Stem name assigned to the STEM
parameter
82 Messages