HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 24 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKU0x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
Access to the REXX variable identified by name failed.REXX failure return code=nnnn
starting with variable name
YKU010E TSO RC=40
For details about the return code, see IKJCT441 in the
TSO/E Programming Services.
nnnn
Error code returned upon REXX
access
The specified copy group attribute value is invalid for
this command.
Invalid Copy Group attribute
name
YKU050E MSG SC=36
RC=48 (attribute-value)
Correct the value and then re-execute the command.
name
REXX variable name
attribute-value
REXX variable value
The YKSUSPND command with the ATTIME parameter
specified was executed on a Cnt Ac-S Z copy group.
This parameter is invalid on Cnt Ac-S Z copy groups.
ATTIME parameter invalid for CA
Copy Group
YKU054E MSG SC=36
RC=48
Re-execute the YKSUSPND command without specifying
the ATTIME parameter.
The PURGE and DEVN parameters cannot be specified
simultaneously for a Cnt Ac-J Z copy group.
Specify PURGE and DEVN
parameter exclusively for CAJ
Copy Group
YKU055E MSG SC=48
RC=48
The PURGE and VOLUNIT parameters cannot be
specified simultaneously for a Cnt Ac-J Z copy group.
Specify PURGE and VOLUNIT
parameter exclusively for CAJ
Copy Group
YKU055E MSG SC=48
RC=48
The DRAIN parameter cannot be specified for a Cnt
Ac-J Z copy group.
DRAIN parameter cannot be
specified for CAJ Copy Group
YKU056E MSG SC=48
RC=48
The YKSUSPND command was executed on a Cnt Ac-J
Z copy group with the ATTIME parameter or CANCEL
ATTIME and CANCEL parameters
are invalid for CAJ Copy Group
YKU057E MSG SC=36
RC=48
parameter specified. These parameters are invalid on
Cnt Ac-J Z copy groups.
Re-execute the YKSUSPND command without specifying
the ATTIME or CANCEL parameter.
One or more devices in the HP XP 256 Disk Array
storage system do not support TCA copy groups.
Some pairs in this group do not
support TCA services.
YKU058E MSG SC=36
RC=48
Check that the command can be executed on this copy
group, and then re-execute the command.
The YKSUSPND command terminated with the return
code nnnn and the reason code rrrr.
YKSUSPND command return
code=nnnn, reason code=rrrr
YKU099I TSO
This message is always displayed to indicate the return
code and the reason code.
nnnn
Maximum among the severity codes
returned during command execution
92 Messages