HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 25 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKV0x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
Maximum among the severity codes
returned during command execution
Table 26 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKW0x)
Explanation and Recommended ActionsMessage TextMessage ID
The specified copy group copy-group did not reach the
requested status state within the specified time limit.
Timeout limit has expired without
group copy-group reaching state
state.
YKW001W TSO
Because the specified copy group contains a copy pair
whose P-VOL is offline, the IEA494I message is not
issued.
Primary Devices OFFLINE. Unable
to receive IEA494I messages.
YKW002E TSO
Make all P-VOLs within the specified copy group online,
and then re-execute the command.
One or more copy pairs identified by index within the
specified copy group copy group entered a status
Unexpected transition of group
copy-group pair index device
xxxx to state state.
YKW003E TSO
identified by state that does not lead to the requested
GOTO status. It is probable that this status transition was
triggered manually.
Conduct an investigation using the ISPF panel
interface's monitor function.
The YKWATCH command uses the YKLOAD command
to obtain the copy group configuration. An error
occurred during execution of the YKLOAD command.
YKLOAD error return code =
nnnn
YKW006E TSO
Conduct an investigation using the ISPF panel
interface's load function.
nnnn
Return code of YKLOAD command
For details, see the description for
the YKLOAD command in the HP
P9000 for Business Continuity
Manager Software Reference Guide.
The YKWATCH command uses the YKQUERY command
to establish the copy group status start baseline. An
YKQUERY error return code =
nnnn.
YKW007E TSO
error occurred during execution of the YKQUERY
command.
Conduct an investigation using the ISPF panel
interface's load function.
nnnn
Return code of the YKQUERY
command
For details, see the description for
the YKQUERY command in the HP
P9000 for Business Continuity
Manager Software Reference Guide.
The YKWATCH command uses the YKCONMSG command
to monitor the console message traffic of IEA494I
YKCONMSG error return code
= nnnn
YKW008E TSO
copy status messages. An error occurred during
execution of the YKCONMSG command.
94 Messages