HP P9000 for Compatible FlashCopy Mirroring User Guide (AV400-96388, October 2011)

in the Volume List on the upper right of the Pair Operation window. No volume will be displayed
when you select Storage system on the top of the Tree.
DescriptionItem
Located on the upper right of the Pair Operation window, displays the following information:Volume List
• Message: Displays a message when there is no volume or pair to be displayed. If you see
the message in the Volume List, click a different icon in the Tree on the left area of the Pair
Operation window.
• S-VOL: Displays the information of the S-VOL in XX:YY:ZZ (LDKC number: CU number:LDEV
ID) format.
• Status: The status of the BC Z pairs. For detailed information for the BC Z pair status, see
the HP P9000 Business Copy for Mainframe Systems User Guide.
• T-VOL: Displays the information of the T-VOL in XX:YY:ZZ (LDKC number: CU number:LDEV
ID) format. If there is no T-VOL, --- displays.
• Copy Pace: Displays the copy pace of the BC Z pair.
• Sync.: The information displayed under this column varies according to the pair status.
For details, see the following.
Simplex: - - - is displayed.
Pending: The progress (%) of copying.
Duplex: Identical data (%) of S-VOL and T-VOL.
SP-Pend, V-Split: Copy completed data (%).
Split, Resync, Resync-R: Identical data (%) of S-VOL and T-VOL.
Suspend: - - - is displayed.
Deleting: - - - is displayed.
• Emulation: Displays the emulation type of the paired volume.
• Capacity(Cyl): Displays the number of cylinders assigned to the volume.
• CTG: Displays the registered ID of the consistency group. If there is no consistency group,
--- displays.
• CLPR(S): Displays the cache logical partition of the S-VOL.
• CLPR(T): Displays the cache logical partition of the T-VOL.
• Relationship(S): The current state of the volume in terms of whether the Compatible
FlashCopy and Compatible FlashCopy SE relationship is established or not. When no
relationship is established, --- displays. When a relationship is established, the status of
the volume displays as shown in the following table. The parameter displayed in
Relationship(S) changes according to whether the volume is S-VOL or T-VOL, or the settings
are normal or not.
Table 65 Parameters displayed in relationships
ParameterVolume
Settings are AbnormalSettings are Normal
S- Failed, S-Full,S- NormalS-VOL
S-Full & Failed
T- Failed, T-Full,T- NormalT-VOL
T-Full & Failed
ST-Failed, ST-Full,ST-NormalVolume set for both S-VOL and T-VOL
ST-Full & Failed
When you select and right-click a volume in the Volume List, the menu will be displayed.
110 Compatible FlashCopy/Compatible FlashCopy SE GUI Reference