HP P9000 for Compatible FlashCopy Mirroring User Guide (AV400-96388, October 2011)

Figure 27 Set SCP Time dialog box
The following items display in the Set SCP Time dialog box:
Table 28 Items display in the Set SCP Time dialog box
DescriptionItem
Specifies the state-change-pending time in seconds (0 to 600 seconds). The text box displays the
state-change-pending time that is set to the CU selected in the FCZ/FCSE window by default. If
SCP Time(sec.)
text box
multiple CUs are selected and the state-change-pending time that is set to each CU is different, the
text box will be blank by default.
The OK button closes the SCP Time dialog box and displays the changed state-change-pending
time in the FCZ/FCSE window. If the SCP Time (sec.) text box is blank, the setting in the SCP Time
dialog box is invalid.
OK button
The Cancel button cancels the setting in the SCP Time dialog box and closes the dialog box.Cancel button
Establishing Compatible FlashCopy relationships by using z/VM CP commands
You can use the following commands when establishing Compatible FlashCopy relationships.
Table 29 z/VM CP command for establishing Compatible FlashCopy relationships
DescriptionCP command
Establishes the relationship in the Copy mode. Cancels the relationship after the
completion of the background copy.
FLASHCOPY
Creates the Persistent relationship. Does not cancel the relationship even after the
completion of the copy (The Incremental FlashCopy function, the Nocopy mode, and
the S-VOL write-protect specification are available.).
FLASHCOPY ESTABLISH
Starts the background copy of the relationship created in the Nocopy mode. Does not
cancel the relationship even after the completion of the copy.
FLASHCOPY BACKGNDCOPY
Performs the restoration (resync) of the relationship created by the Incremental
FlashCopy function. Does not cancel the relationship even after the restoration.
FLASHCOPY RESYNC
Cancels the S-VOL write-protect for the relationship established by the S-VOL
write-protect specification. Does not cancel the relationship.
FLASHCOPY TGTWRITE
For details about the CP commands, see the IBM manual.
Establishing Relationships by using z/VM FLASHCOPY command
The FLASHCOPY command cancels the relationship after the completion of the copy. The following
table shows the parameters are available when establishing the relationship by using the
FLASHCOPY command.
Establishing Compatible FlashCopy relationships 57